Simplified LED Light Remote Controller Connector Set for Strips

Product Description

Notice! The connector is a male connector. Pulling out the male connector will transform it into a female connector (it can be pulled out if you don't need it), as shown in picture 3.

The RGB remote controller is compatible with 5050, 2835, and 3528 LED RGB light strips, and is specifically designed for 4-pin LED strips.

The LED light adapter has an input of 110-240V and an output of DC 12V/2A (a US LED power supply adapter is included). If your light strip requires a 24V power supply voltage, and our power supply voltage is 12V, the brightness of the light strip will be dim or it may not work.

Notice! ① Pull out the plastic cover on the bottom of the remote before use. ② Connect the box output port to the LED strip (the arrows marked between the control box and the strip connector should be in the same position). ③ The remote should be aimed at the IR receiver with no obstacles in the way. ④ For indoor use only, keep away from water.

If the buttons do not control the correct colors, first press the remote control switch button to turn off the light strip. Then press the FADE7 button (the last button on the bottom right). The light strip will flash. Next, press the switch button to turn the light strip back on, and the buttons should now control the correct colors. If not, repeat the above steps.

product information: